LL209AA

Product Description: 0209AA” is a LLDPE copolymer with butane as commoner which contains anti- oxidant. It is recommended for general purpose applications. It is suitable for blending with conventional LDPE. Film made from pure LL 02090 AA has the following advantages over conventional LDPE: Better sealing, higher puncture resistance Greater drawdown capability Higher tensile strength Neutralizer: Calcium Stearate Antioxidant: Irganox1010, Irganox168

Applications:

• Food Grade
• Heave duty sacks, agricultural films, liners.
• Produce bags, stretch films

Processing Condition:

• Recommended melt temperature: 180-225 °C Film Blowing Machine: Dr.Collin 30M (Extruder) +180/400(Unit) Zone Temperature: 200 °C Hopper Temperature: 180 °C Screw speed is set to 50 rpm The feeder of the extruder is cooled by cooling water CWS/CWR (35-45 °C) Blow up ratio: 2 Die Diameter: 75 mm Die Gap: 1.2 mm 2.

CRP 100 N

Product Description: HM-CRP100N (PE100) is a natural pipe grade resin which is manufactured by suspension
polymerization of ethylene monomer, HM-CRP100N(PE100) is a bi-modal high density polyethylene with 1-Butene as commoner.

Characteristic Properties

• Natural PE100 pipe resin.

Density:

• 0.946-0.950 g/cm3

Main Applications:

• Top quality PE100 pressure
  Pipes for gas and water transportation at higher pressures or with thinner walls as PE80 (UV stabilization and/ or pigments during processing)

Additives:

• Antioxidant/Process stabilizer
  Lubricant (processing aid)/ acid scavenger

PVC-S65

Product Description: PVC contains approximately 65% by weight of chlorine. This polymer possesses thermoplastic properties. Grade S65 has low porosity & very high bulk density. Therefore, it is most suitable for rigid applications, high machine throughput & specific applications as additive polymer

Applications:

• Extrusion of flexible sections and hoses Calendaring
• Typical Data: (Table)

(BL3) HF4760

Product Description: HDPE made via Hostalen HF-4760(BL3) is a blow molding grade resin with high density polyethylene with 1-Butene as monomer which is manufactured by the suspension polymerization of ethylene monomer. Stiffness, good ESCR are its spatial properties. High rigidity and good followability which made it proper for usage in bottles and small blow molding goods. HDPE: HF-4760(BL3) Characteristic Properties High density and Stiffness Good followability and impact Strength Good Stress Cracking resistance.

Density:

• 0.952-0.956 g/cm3

Main Applications:

• For container with capacities ranging from a few ml up to 10 liters, also for production of sheets for thermoforming.

Additives:

• Antioxidant/Process stabilizer Lubricant/ acid scavenger

HDPEF7000

Product Description: DESCRIPTION TIPELIN 7000F is a high density bimodal polyethylene copolymer (with butene-1 as monomer) intended for blown film of products with excellent mechanical strength and good stiffness. It offers good process ability at high speed. The grade contains antioxidant and acid scavenger. APPLICATIONS TIPELIN 7000F is recommended for disposal waste bags, grocery bags and ultra-thin films.

LDPE 2420H

Product Description: 2420 H is a non -additivities, low density Polyethylene. It is delivered in pellet form.
Storage: Polyethylene products (in pelletized or powder form) should not be stored in direct sunshine and/or heat radiation. Ultraviolet causes a change in the materials properties. The Storage area should be dry and preferably not exceed 50 °C. Under cool, dry, dark conditions polyolefin resins are expected to maintain the original properties for at least 18 months. FM Plastics cannot be held responsible for diminishing qualities due to poor storage conditions, such as; color change, foul smell etc. Generally, it is considered best to process PE resin within 6 months after delivery. Handling: Ensure proper ventilation of the work environment to minimize health and safety hazards from fine particles. Ensure machinery and equipment is properly grounded to prevent sparks that can ignite dust. Molten polymers will cause thermal injuries to organic matter please ensure safety glasses and appropriate safety apparel is worn

Application:

• Bags & pouches
• Film
• Shrink Film
• Blown Film
• Cast Film

Processing Method:

• Cast Film
• Blown Film

Features:

• Good Heat Sea
• Optical
• Good Process ability
• Food grade